A D J U S T I N G T H E L C D D I S P L A Y

Factory Presets, Multi-Sync, and User Settings

Factory Presets: To display images with the best quality (based on the incoming signal), Cintiq comes with a number of factory default standard display modes. Refer to pages 55 and 56 for input signal specifications.

Multi-Sync:When connected as a VGA display, Cintiq attempts to automatically synchronize to the incoming signal. If Cintiq does not automatically synchronize with the incoming signal, you can use the OSD Reset Auto Adjust option to initiate display synchronization. If necessary, further screen display adjustments can be manually made using the On Screen Display (OSD) controls.

User Settings: When you manually set the display using the OSD function, the settings are stored within Cintiq for use the next time the unit receives a similar signal. This is applicable to all display modes.

Working with On Screen Display Settings

Cintiq is equipped with an On Screen Display function. The OSD function enables you to adjust and optimize a variety of display settings at the touch of a button. To avoid accidental activation when the Interactive Pen Display is rotated, the OSD controls are located on the back of the unit. Simply reach over the top of the display unit to locate the buttons with your fingers.

Note: The + and – selection buttons are embossed with braille-style dots so that you can easily identify them by touch.

 

 

Enter button

 

 

Activates or deactivates the

(+)

(–)

selected OSD menu option.

 

Menu button

 

 

Opens or closes the

 

 

OSD menu.

 

 

Selection buttons

Use these buttons to select an option that can then be activated when you press the Enter button.

After activating a selected option, press the + button to increase a selected item value, and press the – button to decrease it.

38