S T E P 1 : L C D D I S P L A Y I N S T A L L A T I O N

Cintiq can be used alone or with another display, such as a CRT monitor or LCD projector. To use Cintiq with another display, you will need two video cards or a video card with dual output. Depending on the capabilities of your video card and operating system, you may be able to set up Cintiq as a mirrored, extended, or independent display. Refer to your video card documentation for more information on its capabilities.

In the first stage of the installation process you will install Cintiq as a display on your system. As you work through this stage, please refer to the LCD Display Cabling Diagram on the following page when making cable connections.

Important: Do not connect the USB or serial data cable until instructed to do so.

■Turn off your computer.

Caution: Never connect or disconnect the video or power cables while your computer or Cintiq are powered on—this can damage the LCD display or video card.

■If your computer has only one video connector, you will need to unplug your previous dis- play. Determine if your computer has a digital (DVI-I, DVI-D, or ADC) or analog (VGA) connector, and set the Digital/Analog (DVI/VGA) switch located on the back of Cintiq for the video connection you are using. Move the switch to the right toward the OSD buttons for Digital (DVI-I, DVI-D, or ADC), and move it to the left toward the tablet edge for Analog (VGA). See A

■If you are connecting to a DVI-I connector, plug the DVI-I video

cable into the DVI-I connector of your video card.

DVI-I Connector

If you are connecting to a DVI-D connector, plug the DVI-I video

 

 

 

 

 

 

 

cable into the DVI-D to DVI-I adaptor supplied with Cintiq.

 

 

 

 

 

 

 

Then plug the adaptor into the DVI-D connector on your video card.

DVI-D Connector

If you are connecting to an ADC connector, you will need to

obtain an ADC to DVI-D adaptor. Plug the video cable into the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVI-D to DVI-I adaptor supplied with Cintiq. Next, plug this adaptor

 

 

 

 

 

 

 

into the ADC to DVI-D adaptor. Then plug the ADC adaptor end into

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the ADC connector on your video card.

Apple ADC Connector

If you are connecting to a VGA connector, plug the DVI-I video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cable into the VGA to DVI-I adaptor (supplied with Cintiq) and then

 

 

 

 

 

 

 

into the VGA connector on your video card.

VGA Connector

Be sure to tighten the thumbscrews on the connectors. See B

 

■Connect the power supply to Cintiq. See C Then connect the supply’s power cable and plug the supply into an AC outlet. See D

19