CUSTOMIZING

CONTENTS

INDEX

21

 

 

 

 

Adjusting tip feel, eraser feel, and double-click

To adjust the tip or eraser sensitivity of your Graphire4 pen, select the PEN tab. To create broad brush strokes or to click with a light touch, use a soft tip setting. For maximum control while drawing thin lines, use a firm tip setting. To erase with a broad stroke or to click with a light touch, use a soft eraser setting.

For maximum control while erasing, use a firm eraser setting.

Customizes the amount of pressure needed to erase. Drag the slider to a softer or firmer setting.

Customizes the amount of pressure needed to click or draw. Drag the slider to a softer or firmer setting.

Adjusts the size of the double-click area and the double-click speed. A larger setting makes double-clicking easier.

Hints:

•Use a soft TIP FEEL for a wider range of pressure values with most pressure- sensitive applications.

•In some applications, a soft pressure setting can make the pen overreact – any small press on the pen is magnified on the screen. If you experience this, try a firmer TIP FEEL setting.

•Double-clicking: To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).

Note: A large double-click distance may cause a delay at the beginning of your brushstrokes in some drawing applications. If you notice such effects, try setting a smaller double-click distance and using a side switch to double-click (see using the side switches). You can also set one of the ExpressKeys to double-click.

When checked, an audible “click” sound will be heard whenever a pen click occurs and your computer speakers are turned on.