Double-clicking is difficult.

Be sure you are quickly tapping the tablet twice in the same place on the tablet active area.

Using a side switch to double-click is recommended (review the techniques in clicking).

Set one of the tablet ExpressKeys to DOUBLE CLICK and use it to issue double-clicks.

See adjusting tip feel, eraser feel, and double-click:

•Try increasing the DOUBLE-CLICKDISTANCE.

•Try using a lighter TIP FEEL.

 

Windows: Try setting your system to launch programs with a single

 

click. See clicking.

 

 

The pen selects everything,

Open the Pen Tablet control panel and go to the PEN tab. Move the TIP

will not stop drawing.

FEEL slider toward FIRM. If this does not help, see testing your tablet.

 

 

The eraser selects everything

Open the Pen Tablet control panel and go to the PEN tab. Move the

or will not stop erasing.

ERASER FEEL slider toward FIRM. If this does not help, see testing your

 

tablet.

 

 

You notice a screen delay at

Try decreasing the DOUBLE-CLICKDISTANCE (see adjusting tip feel,

the beginning of pen strokes.

eraser feel, and double-click).

 

 

You have to press hard with

Open the Pen Tablet control panel and go to the Pen tab. Move the TIP

the pen when clicking or

FEEL slider toward SOFT.

drawing.

 

 

 

The pen tip does not function.

Make sure the tablet status LED changes from blue to green when the

 

pen tip is pressed to the tablet surface. If it does not, you may have

 

defective hardware (see testing your tablet).

 

 

The upper or lower side switch

Be sure you press the side switch when the pen tip is within 5 mm

does not work.

(0.20 inch) of the tablet active area – do this without pressing down on

 

the pen tip.

 

From the Pen Tablet control panel, verify that the side switch is set to the

 

function you are expecting to occur.

 

Make sure the tablet status LED changes from blue to green when you

 

press the side switch. If it does not, you may have defective hardware

 

(see testing your tablet).

 

 

The screen cursor jumps back.

Do not place the pen or cordless mouse on the tablet when they are not

 

in use, or when you are using another pointing device. Leaving your

 

tool on the tablet may interfere with screen cursor positioning when

 

using other input devices.