FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS
Factory presets: For optimal display quality, set your video card to the maximum (native) resolution that can be used with your pen display. See the product specifications for details.
If the pen display does not automatically synchronize with the incoming signal, you can use the OSD AUTO ADJUST option to initiate display synchronization. Further screen display adjustments can be manually made using the On Screen Display (OSD) controls.
Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their default settings will invalidate the ICC color profile that was included on the Installation CD. (Some models may not include a color profile.)
ON SCREEN DISPLAY (OSD) SETTINGS
The OSD function enables you to optimize a variety of display settings at the touch of a button. Make adjustments using the OSD controls located on the upper left edge of the unit.
– | + |
1. MENU button | ENTER button |
Press to open or exit the OSD menu. | Activates the selected OSD |
| menu option. |
2. Selection buttons
Use these buttons to select and highlight an option. Then press the ENTER button. The current settings and adjustment
Use the buttons to select and adjust the option settings. (Press the + button to increase a selected item value. Press the – button to decrease it.)
After making changes, press the ENTER button to save.
See the following pages for a detailed description of menu options.
Note: After changing a setting, the OSD menu will automatically close after a few moments of inactivity. You can also press the MENU button to close the OSD menu. All settings are automatically saved when the OSD menu closes and will be used the next time the unit receives a similar video signal.
This is applicable to all display modes. If you make changes to the display appearance and cannot return to the original settings, use the RESET option to return the pen display to its original factory defaults.
23