Interactive pen display

ContentsIndex

31

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the interactive pen display is first connected. If some portion of text appears blurred, use the AUTO ADJUST option to automatically synchronize to the incoming signal (see factory presets, auto-sync, and user settings). If the image is still blurred, adjust pitch and phase by following the below procedure. For optimum display quality, set your video card to the maximum (native) resolution that can be used with your pen display. See the product specifications for details.

1.In the Wacom Tablet control panel, select the CALIBRATE tab.

2.If you are working with multiple displays, be sure the option corresponding to the pen display is selected in the MONITOR menu.

3.Click on the CALIBRATE... button to activate the calibration screen.

4.Using the OSD controls, open the OSD menu and select the PITCH option.

Then adjust the pitch level so the pattern of fine vertical stripes displays evenly.

5.In the OSD menu, select the PHASE option. Adjust the phase level so the adjustment pattern shows clearly.

6.After completing these adjustments, press the ENTER and MENU buttons to exit the OSD menu.

7.Click on the CANCEL button or press ESC to exit the calibration screen.

Adjustment pattern for pitch and phase.

ContentsIndex

31