Before you begin, verify that you have selected the correct application and tool for which you want to create advanced mappings. Then plan your mapping area(s). For example, you may want to define a small area for navigation, and a larger one for drawing.
For best results, patiently complete each of the following steps:
1.Set preferences by clicking on the READOUT OPTIONS... button. From the READOUT OPTIONS dialog box, select an option from each
Measurement units can be in inches, cm, points, or counts. Counts are lines of tablet resolution or screen pixels.
Starting point where measurements originate, from upper left or lower left corner.
Coordinates of the origin and the diagonal corner.
Coordinates of the origin and the height and width of the area.
2.Select the tablet mapping to define. The mapping numbers are displayed in the top left corner of each tablet area graphic. If multiple tablet mappings have been defined, click inside the tablet area you want to select or click on the SELECT MAP... button and type the number of the mapping you want to select.
Contents | ADVANCED FEATURES |
Index | Page 109 |