2.Select an item from the tablet button’s pull-down menu.

•KEYSTROKE. Simulates a keystroke or keystroke combination.

•PRESSURE SOFT. Sets the pressure feel of the pen, airbrush, or eraser to a soft setting.

•PRESSURE FIRM. Sets the pressure feel of the pen, airbrush, or eraser to a firm setting.

•PRESSURE NORMAL. Returns the pressure feel of your tool to the factory default.

•PEN MODE. Places your tool in Pen Mode.

•MOUSE MODE.... Places your tool in MOUSE MODE. When first setting a tablet button to MOUSE MODE..., the MOUSE SPEED dialog box is displayed where you can adjust the mouse acceleration and speed.

•QUICKPOINT MODE. Divides the tablet into a QuickPoint area and a drawing area. This option is only available for Intuos2 9x12/A4-regular or larger tablets.

•IGNORED. Leaves the tablet button undefined. When a tablet button is set to IGNORED, the button number does not appear on the display screen when an Intuos2 tool is moved over the button.

•DEFAULT. Returns a button to its default settings. These settings match the predefined menu strip functions.

•Back. Sets the button to emulate the back function within your internet browser.

•Forward. Sets the button to emulate the forward function with your internet browser.

•Stop. Sets the button to emulate the stop function within your internet browser.

•Refresh. Sets the button to emulate the refresh function within your internet browser.

After defining a new tablet button function, you may want to label the appropriate menu strip button (with 6x8/A5 and larger tablets only). Lift the left edge of the tablet overlay and remove the menu strip.

Write the function name on the button with a pencil, and then replace the menu strip. Take care not to damage the overlay or lose the menu strip.

Contents

CUSTOMIZING

Index

Page 85