To install the DuoSwitch:
1. Remove the pen tip cone by turning it |
|
counterclockwise. Then pull the grip | 1 |
forward over the pen tip. |
2. Install the original grip (the one with the |
|
DuoSwitch access slot) by aligning the |
|
pen case rails with the grooves inside |
|
the grip and pushing the grip over the | 2 |
pen tip. When properly positioned, the |
DuoSwitch access hole will reveal the trimmer capacitor. Then install the pen tip cone by turning it clockwise onto the pen.
3. Align the DuoSwitch into place, making | 3 |
sure to match the switch position to the grip molding. Then gently press in on the DuoSwitch until it snaps into place.
Contents | USING INTUOS2 |
Index | Page 44 |