ADJUSTING DOUBLE-CLICK
Double-clicking with the pen tip can be made easier by expanding the tap area that accepts a double-click (the double-click distance) and reducing the speed required to perform a double-click. This can be set in the DOUBLE-CLICKtab. Because a large double-click distance may adversely affect your brushstrokes in some drawing applications, Wacom recommends setting a small double-click distance and using the upper side switch to double-click.
Use custom double-click settings when checked.
Note: DOUBLE-CLICK ASSIST can be enabled for some applications and disabled for others. See Working with Application-Specific Settings for more information.
Enter a number from 1 to 25 pixels or click the up and down arrows to increase or decrease double-click distance.
Drag the slider to change the double-click speed.
A slower speed makes double-clicking easier.
Double-click on the target to test your settings before applying them.
Tap twice on this icon with your pen tip to automatically set double-click distance and speed based on the way you normally double-click.
Contents | CUSTOMIZING |
Index | Page 56 |
