GENERAL PROBLEMS

Double-clicking is difficult.

Be sure you are quickly tapping the tablet twice in the same place on

 

the tablet’s active area. Wacom recommends using the side switch to

 

double-click (review the techniques in Clicking).

 

Try increasing the DOUBLE-CLICKDISTANCE or reducing the double-

 

click speed (see Adjusting Double-Click).

 

Try using a lighter TIP PRESSURE FEEL (see Adjusting Tip Feel).

 

 

The 4D Mouse or Lens Cursor

Open the Wacom control panel and go to the TOOL BUTTONS tab for

buttons work but the screen

your 4D Mouse or Lens Cursor. Make sure the USE BUTTONS ONLY

cursor will not move.

checkbox is deselected.

 

 

The Intuos2 Pen or Airbrush

Open the Wacom control panel and go to the tool’s TIP FEEL tab.

selects everything, will not stop

Move the TIP PRESSURE FEEL slider toward FIRM, or select the MORE

drawing.

OPTIONS button and increase the CLICK FORCE setting. If this does not

 

help, refer to Testing Your Intuos2 Tools.

 

 

The eraser selects everything

Open the Wacom control panel and go to the ERASER FEEL tab.

or will not stop erasing.

Move the ERASER PRESSURE FEEL slider toward FIRM, or select the

 

MORE OPTIONS button and increase the CLICK FORCE setting. If this

 

does not help, refer to Testing Your Intuos2 Tools.

There is a delay at the beginning of pen strokes when using the Intuos2 Pen or Airbrush for drawing or selecting.

Try decreasing the DOUBLE-CLICKDISTANCE or increasing the double- click speed (see Adjusting Double-Click). If that does not work, try unchecking the DOUBLE-CLICKASSIST checkbox.

Contents

HAVING TROUBLE?

Index

Page 123