To get the best performance from your Wadia 27i Decoding Computer, ond for your own safety, please read and follow these important safety instructions.
1.Before operating the Wadia 27i Decoding Computer please read all of the operating and sofety instructions.
2.Never place the Wodia 27i Decoding Computer near heat sources such as radiators, fireplaces, stoves, or other appliances that produce heot. Avoid placing the Wadia 27i
Decoding Computer where it will be subject to direct sunlight or low temperatures.
3.This product is equipped with a three prong IEC power inlet that includes an earth ground connection. To prevent shock hazard, all three connectors must always be used. If your electrical outlets will not accept this type of plug, an adapter may be purchased. If an adapter is necessary, be sure it is an approved type and that it is used properly, supplying an earth ground. If you are not sure of the integrity of your home’s electrical system, contact a licensed electrician for assistance.
4.AC extension cords are not recommended for use with this product. If an extension cord must be used, be sure it is an approved type and has sufficient current carrying capacity to power this product.
5.Before clearing the Wadio 27i Decoding Computer, always disconnect the power supply cord Use a soft cloth and, if necessary, dampen with clean water or mild cleaning agent.
Never apply water, or any other cleaner, directly to the chassis.
6.If you smell smoke, or an abnormal smell, immediately unplug the Wadia 27i Decoding Computer from the power supply and contact your Wadia dealer.
7.Never attempt to service the Wadia 27i Decoding Computer beyond what is described in this Owner’s Manual. All service should be performed by qualified service personnel.
8.Unplug unit if it becomes wet.
9.Do not open unit when attached to AC outlet.
10Replace fuse only with the exact type originally included. 100 volt: 1 amp
120 volt: 1 amp
220 volt: 1/2 amp
240 volt: 1/2 amp
11 . Do not attempt to repair or modify your Wadia 27i Decoding Computer.