Each digital input on the Wadia 27i can be configured as either ClockLink On or ClockLink Off.
Clocklink On: Should be used only with ClockLink sources, such as the Wadia 27i.
ClockLink Off: Should be used with all
To change the ClockLink configuration for any input, press the Enter key repeatedly until the Configure ClockLink Screen for the desired input is displayed. The picture below shows the Configure ClockLink Screen for Input 2 showing Clocklink On.
Using the Volume Up or Volume Down key, select the desired setting
FACTORY SETTING
As delivered from the factory, Input 1 is configured with ClockLink On. All other inputs are configured for ClockLink Off.
