Restoring Factory Settings
You can restore all the Wadia 931 Digital Controller configuration settings back to the factory defaults. Use the menu map to navigate to the Restore Factory Settings screen, select Y as shown below, and press the enter key:
|
|
|
|
|
|
Resto | re | Facto | ry |
|
|
Set | t i ngs | ? |
| y | / n |
Confirm that you want to restore the factory settings by selecting ‘y’ and pressing enter,as shown below:
|
|
|
|
|
|
Con | firm | Resto | re |
|
|
Facto | ry | Se tt | i n g | y | / n |
Saving Configuration Settings
Whenever you finish configuring either the input or output configurations, you will be asked to choose whether you wish to save the settings. If you do not save the settings, the Wadia 931 Digital Controller will revert to the last saved settings. If none have ever been saved, it will revert to the factory default settings.
Once you have saved new configuration settings, they will remain in effect until new settings are saved. Configuration settings are stored in
Exiting Configuration Mode
After choosing whether to save configuration settings, you will be asked if you want to exit configuration mode. If you select “y”, you will leave Configuration mode and return to the main screen in operational mode. If you select no, you will return to the Configure Inputs screen, as indicated on the Configuration Screens map.
27
