Wadia Digital 931921 operation manual Overview, How to Use this Manual, Inventory

series 9 DecodingComputer System

Overview

This manual covers the installation and operation of the complete Wadia series 9 Decoding Computer System. There are three steps to a complete installation:

•Installation and configuration of the Wadia 931 Digital Controller

•Installation and configuration of the Wadia 921 Mono Decoding Computers

•Operation of the Wadia series 9 Decoding Computer System

How to Use this Manual

Included in this manual is all the information you need to completely install and operate the Wadia series 9 Decoding Computer System. For a complete set-up, we recommend that you follow the installation and operation instructions from start to finish. If you already have experience installing, configuring, and operating Wadia components, you can use the Quick Start section, and refer to the complete instructions where needed.

Inventory

Before proceeding, please check to make sure that you received all of the components that comprise the Wadia series 9 Decoding Computer System. You should have received the following boxes:

Wadia 931 Digital Controller

•Accessory kit

•Remote control

•Two type AAA batteries

•1 Glass fiber cable, 10 feet long

•AC power cord (12 gauge)

•Three tip-toes with threaded studs

•Three steel coasters

•1 BNC to RCA adapter

Wadia 921 Mono Decoding Computers (one per channel)

•Accessory kits

•2 Glass fiber cables, 35 feet long

•AC power cord (12 gauge)

•Three tip-toes with threaded studs

•Three steel coasters

For a standard 2-channel set-up you should have 3 boxes and 3 accessory kits. If you did not receive all cartons, contact your dealer before continuing.

4