Low Level Threshold Master

Moves all Low Level Threshold faders by the same value, relative to each of their current positions.

Range:

0 to ±30 dB

Link Mode Selector

The Link Mode Selector allows the selection of one of five link modes. Each Link Mode determines which channels are linked, both in the interface controls and with regard to the dynamic detector sidechain and compression.

Link Mode selection affects the colors of both low and high level compression threshold and gain controls, which provides per channel indication of link status.

™All Linked

™5 Linked Sub

™Front Rear Sub

™Center Quad Sub

™Center Front LR Rear (LFE Is Bypassed)

Cut (Attenuation) / Boost Meters

Display the amount of gain cut and/or boost for each of the 3 possible Link groups.

ƒAttenuation is displayed from the top down.

ƒBoost is displayed from the bottom up.

Each of the 3 meters (yellow, red, blue) corresponds to a Link Group, which are indicated in the text box located below the meters.

Numeric indicators which display the maximum attenuation are located above the meters; maximum gain is displayed below the meters. Reset these values by clicking anywhere on the meter.

The meters display up to -30dB of attenuation, and +30 dB of gain boost.

MV360˚ User Manual

10

Page 10
Image 10
Waves MV360 user manual Link Mode Selector, Cut Attenuation / Boost Meters, Low Level Threshold Master