Controls, Range | Waves MV360 specs

3.2 Controls

Sets the low level compression threshold. Compression is applied to signals below this threshold.

-72 to -36 dBFS

Sets the high level compression threshold. Compression is applied to signals above this threshold.

Range:

0 to -30 dBFS

Controls the amount of makeup gain applied to the compressed low level signal.

Range:

0 to +30 dB

Trims the amount of automatic gain compensation applied to the compressed high level signal.

Range:

0 to -30 dBFS

MV360˚ User Manual

Image 8

Contents

MV360˚ Appendix a -Link Modes Table of Contents IntroductionWaveSystem Introduction WelcomeProduct Overview Concepts and Terminology Dither High Level CompressorLink Modes Components Quickstart Guide Interface and Controls Interface High Level Compression On/Off Low Level Compression On/Off ControlsRange Master Fader Controls Low Level Threshold Master Link Mode SelectorCut Attenuation / Boost Meters Preset Handling Preset TypesWaveSystem WaveSystem Toolbar Loading Presets and Setups Saving Presets and SetupsPut into Preset Menu As… Save to New File… Deleting Presets Interface ControlsComparison and Copying Toggle Buttons TAB Functions Value Window ButtonsMultiple Selection of Controls Appendix a -Link Modes All LinkedLinked Sub Front Rear Sub Center Quad Sub Center Front LR Rear LFE Is Bypassed