Wayne-Dalton 5150 Single Spring, 2” ONLY, TWO SPRINGS 3-3/4”, Split Solid, Shaft, Two Springs

This illustration shows
15” radius track		(3) 3/8” x 3/4” truss bolts and nuts.
W/TEK Screw to Steel
		(2) for securing end bracket
This illustration shows		(1) for securing horizontal angle
12” radius track
W/Lag Bolt to Wood.
This illustration shows
15” radius track
W/Concrete Anchor	Extra 3/8” truss bolt and nut
	BLACK	Intermediate hangers for all doors over
		11’ high and over 14’ wide. Positioned
BLACK		half way between jamb and rear hanger.
		Laterial brace all
RED		hanger angles.
RED
		1/4” x 9/16”
Doors 16’ to 18’ high use 2		track bolt and nut.
intermediate hangers.
Doors over 18’ use hangers at
6’ max. centers

RIGHT SIDE ILLUSTRATES

DOUBLE ENDCAPS AND

HARDWARE

LEFT SIDE ILLUSTRATES

SINGLE ENDCAPS AND

HARDWARE

SINGLE SPRING

RIGHT HAND DRUM

BLACK

WINDING CONE

BLACK

3” MINIMUM SPRING PAD WIDTH (6” IF FOR TROLLEY OPERATOR)

LEFT HAND DRUM

RED

	RIGHT HAND DRUM
TWO SPRINGS	WINDING CONEBLACK
(2” ONLY)	BLACK
	WINDING CONE
	RED
	LEFT HAND DRUM
PG. 8	RED

TWO SPRINGS

(3-3/4”)

TUBULAR OR 1 PIECE	3-1/2”
SOLID SHAFT	RIGHT HAND DRUM
	BLACK
WINDING CONE	WINDING CONE
RED	BLACK

9” MINIMUM SPRING PAD

WIDTH

LEFT HAND DRUM

RED

NOTE: 6” SPRINGS UTILIZE SOLID SHAFTS

24” MINIMUM SPRING PAD
	WIDTH
TWO SPRINGS	20”
	13”
(3-3/4”)			RIGHT HAND DRUM
SPLIT SOLID			BLACK
			WINDING CONE
SHAFT
			BLACK
		COUPLING (SEE NOTE * )
		EXTRA SUPPORT BRACKET USED WITH SPLIT SHAFT
	WINDING CONE
	RED		RIGHT HAND DRUM
LEFT HAND DRUM		8” MIN.	BLACK
		SPRING
RED	12” MIN.	PAD
FOUR SPRINGS			3-1/2”
(3-3/4”)	PAD
	WIDTH
SPLIT SOLID		13”	WINDING CONE BLACK
SHAFT

WINDING CONE BLACK

WINDING CONE RED

COUPLING (SEE NOTE * )

EXTRA SUPPORT BRACKET USED

WITH SPLIT SHAFT

WINDING CONE RED

LEFT HAND DRUM RED

*NOTE: COUPLING USED ON SOLID SHAFT ONLY. TIGHTEN CONNECTING BOLTS AFTER WINDING SPRINGS. PG. 9