Step 6
Insert casters
You will need: frame assembly and two casters.
Push the casters firmly into the caster inserts in the ends of the caster legs. Figure 5.
Figure 5
Step 7
Check the frame assembly
To avoid having to disassemble your barbecue in a later step, check the positioning of the front frame connector before continuing with the assembly.
Turn the frame assembly over. The front frame connector should correspond with Figure 6.
Single bushing at left
Two bushings at right
Figure 6
Step 8
Install left end panel
You will need: frame assembly and left end panel. (Number 1)
Place the bottom of the left end panel on the caster frame lower cross piece. Set the end panel upright in place. Figure 7.
Figure 7
13
