FlameCheck Safety System
The correct positioning of the thermocouple probe is shown in Figure 18. The tip of the probe is positioned in the flame. The probe senses the heat from the Front burner, and activates the FlameCheck valve. The valve allows the gas to flow into the Front burner. If the Front burner should go out for any reason, the thermocouple probe will cool off, thereby closing the FlameCheck valve, which stops the gas flow to the burners.
If the FlameCheck Safety System should fail to operate, contact
Center line
Thermocouple nuts
1/8 inch 
Ignition holes
Wall of cooking box
Figure 18
37
