Weber 5500 owner manual Step, Secure the side burner

Step 31

Install the control panel, burner control knobs, FlameCheck button and tool holders

You will need: control panel, three burner control knobs, FlameCheck button and three tool holders.

Hook the tool holders over the frame rail. Figure 47.

Set the control panel in place over both frame braces. (Hold the Crossover Ignition button up while setting the control panel in place.) Place your thumbs over the control panel push-in buttons, and push them into the frame brace until they snap into place. Figure 47 (a).

Push on the burner control knobs and FlameCheck button. Figure 47 (b).

Hole in frame brace

(a)

Control panel push-in buttons

Tool holders

(b)

Figure 47

Step 32

Secure the side burner

Pull the right hand swing table up. Stand to the right side of the barbecue. Slightly pull back both side burner locks. Slide the side burner toward the control panel. The locks will snap into the slots in the front and back of the side burner. Figure 48.

Caution: Make sure both locks have snapped into place.

View from above

View from side

Figure 48

33