Fill liquid propane cylinder

Remove plastic dust cover from the fuel cylinder valve.

Note - The liquid propane cylinder manufacturer is

Screw the regulator coupling onto the cylinder

 

responsible for the materials, workmanship and

valve(1), clockwise, or to the right. Hand tighten only.

performance of the cylinder. If the cylinder has a

Note: This is a new type of connection. It tightens

defect, malfunctions, or you have a question regarding

clockwise and will not allow gas to flow unless the

the cylinder, call the cylinder manufacturer’s customer

connection is tight. The connection requires tightening

service center. The phone number is on the warning

by hand only.

 

 

decal, which is permanently attached to the cylinder. If

m WARNING: Do not use a wrench to tighten the

the cylinder manufacturer has not resolved the issue to

connection. Using a wrench could damage the

your satisfaction, then contact the Customer Service

regulator coupling and could cause a gas leak.

Representative in your region using the contact

Regulator vent hole should be at 3, 6, or 9 o’clock. It

information sheet provided with your manual.

should not be pointed up.(2)

 

 

To fill, take the liquid propane cylinder and filler

 

 

 

 

adapter to an RV center or look up gas-propane in the

 

(1)

 

 

phone book for other sources of liquid propane gas.

 

 

 

m WARNING: We recommend that your liquid

 

 

 

 

propane cylinder be filled at an authorized liquid

 

 

 

 

propane gas dealer by a qualified attendant, who

 

 

 

 

fills the tank by weight.

 

 

 

 

IMPROPER FILLING IS DANGEROUS.

 

 

 

 

Tell your liquid propane dealer that this is a new liquid

 

 

 

 

propane cylinder. The air must be removed from a new

 

 

 

 

liquid propane cylinder before the initial filling. Your

 

 

 

 

liquid propane cylinder dealer is equipped to do this.

 

 

 

 

The liquid propane cylinder must be installed, trans-

 

 

 

 

ported and stored in an upright position, and should

 

 

 

 

not be dropped or handled roughly.

 

 

 

 

Never store or transport the liquid propane cylinder

 

 

 

 

where temperatures can reach 125° Fahrenheit (too

 

 

 

 

hot to hold by hand – for example: do not leave the

 

 

 

 

liquid propane cylinder in a car on a hot day).

 

 

(2)

 

For full instructions on safe handling of liquid propane

 

 

 

cylinders, see Section “Operating”.

 

 

 

 

Connect filled liquid propane cylinder

Checking the fuel level in your tank

 

m WARNING: Make sure that the cylinder valve is

Check the fuel level by viewing the color indicator level

closed. Close by turning clockwise.

line on the side of the tank scale.

 

Hook the liquid propane cylinder onto the fuel gauge.

1)

Empty

 

 

Loosen the cylinder lock wing nut. Swing the cylinder

2)

Medium

 

 

lock down. Tighten the wing nut.

3)

Full

 

 

 

 

(1)

(2)

(3)

C-6

Page 23
Image 23
Weber Liquid Propane Grill, 55052 0100 manual Fill liquid propane cylinder, Connection. Using a wrench could damage