Weber 89962 manual Main Burner Ignition & Usage, To Extinguish, Crossover Ignition System

MAIN BURNER IGNITION & USAGE

MAIN BURNER IGNITION

Summary lighting instructions are inside the left hand cabinet door..

mDANGER

Failure to open the lid while igniting the barbecue’s burners, or not waiting five minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flare-up which can cause serious bodily injury or death.

Crossover® Ignition System

Note: The Crossover® Ignition System ignites BURNER 1 with a spark from the igniter electrode inside the Gas Catcher™ ignition chamber.You generate the energy for the spark by pushing the electronic ignition button.You will hear it sparking.

mWARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

A)Open the lid (1)..

B)Make sure all burner control knobs are turned OFF (2).. (Push control knob down and turn clockwise to ensure that it is in the OFF position..)

mWARNING: The burner control knobs must be in the OFF position before turning on the liquid propane cylinder tank valve. If they are not in the OFF position, when you turn on the LP cylinder valve, the “excess gas flow control” feature will activate, limiting the flow of gas from the LP cylinder. If this should occur, turn OFF the LP cylinder valve and burner control knobs. Start over.

mDANGER

When the “excess gas flow control” feature is activated, a small amount of gas is still flowing to the burners. After turning OFF the cylinder valve, wait at least five minutes for the gas to clear before attempting to light the barbecue. Failure to do so may result in an explosive flare-up, which can cause serious bodily injury or death.

C) Turn the cylinder on by slowly turning the cylinder valve counterclockwise (3)..

mWARNING: Do not lean over the open barbecue. Keep your face and body at least one foot away from the matchlight hole when lighting the barbecue.

D)Push BURNER 1 control knob down and turn to START/HI (4)..

E)Push and hold the electronic ignition button.. You will hear it sparking (5)..

F)Check that the burner is lit by looking through the matchlight hole on the front of the cooking box.. You should see a flame (6)..

mWARNING: If the burner does not light in five seconds, turn the Burner 1 control knob to OFF and wait five minutes to let the gas clear before you try again or try to light with a match.

G)After BURNER 1 is lit you can turn on BURNER 2 (and BURNER 3) (7).. Note - Always light BURNER 1 first.The other burners ignite from BURNER 1. ◆

TO EXTINGUISH

Push down and turn each burner control knob clockwise to the OFF position.. Turn gas supply OFF at the source.. ◆

2

OFF	5
APAGADO
ARRETE

4

1

2

7

	5
6	4
The grill illustrated may	3
have slight differences
than the model purchased.

14