Weber E/S Series manual Assembly



Assembly

1. Install the Motor Bracket

Attach the stainless steel motor bracket to the left-hand side of the cooking box, using the 1/4-20 fasteners and the 1/4-20 Keps nuts.

2.Attach the Motor

Slide the motor onto the stainless steel motor bracket.

3.Put the Spit Forks on the Rotisserie Shaft

Slide the forks onto the shaft so that the tines are facing each other. Screw in the thumb screws to hold the forks in place.

4.Insert the Rotisserie Shaft in the Motor

Insert the pointed end of the rotisserie shaft into the motor.

5.Set the Rotisserie Shaft on Rotisserie Support Block

Place the handle(1) end of rotisserie on the support notch.

178724_7519_GenesisRotisserie.in3 3

(1)
9/10/07	1:51:33 PM