GAS INSTRUCTIONS | 13 | ||
|
|
| |
DANGER | a |
|
|
Do not use an open flame to check for gas leaks. Be | SIDE VIEW |
| |
sure there are no sparks or open flames in the area |
| ||
| (1) |
| |
while you check for gas leaks. This will result in a fire |
|
| |
or explosion which can cause serious bodily injury or |
|
|
|
death and damage to property. |
|
|
|
CHECK THAT THE BURNER VALVE IS OFF |
|
|
|
Valve is shipped in the OFF position, but you should check to be sure that |
|
|
|
it is turned OFF. Check by pushing down and turning clockwise. If it does |
|
|
|
not turn, it is off. Proceed to the next step. If it does turn continue turning it |
|
|
|
clockwise until it stops, then it is off. Proceed to the next step. |
| (2) |
|
|
|
| |
CONNECT GAS SUPPLY | b |
|
|
a) To connect gas hose at the supply: Slide back the collar of the quick |
|
| |
disconnect. Push male fi tting of the hose into the quick disconnect, and | TOP VIEW |
| |
maintain pressure(1). Slide the collar closed(2). If it does not engage or lock, |
| ||
repeat procedure. |
|
|
|
b) To connect gas hose at the Fireplace: Slide back the collar of the |
|
|
|
quick disconnect. Push male fi tting of the fi replace connection into the quick |
|
|
|
disconnect, and maintain pressure(1). Slide the collar closed(2). If it does not |
|
|
|
engage or lock, repeat procedure. |
| (1) |
|
Gas will not fl ow unless the quick disconnect is properly engaged. |
|
| |
|
|
| |
WARNING: Make sure that the gas supply hose is |
|
|
|
positioned so as to avoid damage from foot traffic or |
|
|
|
other accidental damage. |
|
|
|
|
| (2) |
|
