41.Attach the remaining Seat (13) to the Sliding Seat Frame (74) with four 1/4Ó x 3/4Ó Bolts (17).
42.Attach the Leg Press Backrest (70) to the Sliding Seat Frame (74) with four 1/4Ó x 3/4Ó Bolts (17).
43.Press 3/4Ó Round Inner Caps (34) into the ends of the two Pad Tubes (28).
Slide one Pad Tube (28) into the hole in the front leg on the Base (8). Slide a Foam Pad (30) onto each end of the Pad Tube.
Slide the other Pad Tube (28) into the hole in the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube.
44.Slide the four Tinnerman Clips (38) down over the slots in the bracket on the Stabilizer (5).
Insert the Weight Pin (39) under one of the Weights (26).
41 |
|
|
|
| 13 |
|
|
| 74 |
| 17 |
|
|
| |
42 |
|
|
|
| 17 |
| 70 |
|
|
| |
|
| 74 |
|
43 |
|
| 34 |
|
| 8 | 30 |
|
|
| |
|
|
| 28 |
|
|
| 34 |
| 34 |
|
|
|
| 30 |
|
|
|
| 29 |
34 |
|
|
|
|
| 30 |
|
44 |
|
|
|
| 26 |
|
|
|
|
| 38 |
| 5 |
| 39 |
|
|
| |
|
|
| Bracket |
|
| 38 |
|
19
