3. ' Attach the Front Leg (8) to the Frame (2) with two
M10 x 65mm Bolts (18), two M10 Washers (24), and two M10 Nylon Locknuts (19).
3
•=
18_=---19
< >
o
5°
Tap three 45mm Square Inner Caps (21) into the | 4 | |
ends of the Leg Lever (4) as shown. | ||
| ||
Tap a 1" Round Inner Cap (23) into the indicated |
| |
end of the Weight Tube (41). |
| |
Insert the Weight Tube (41) into the indicated hole |
| |
in the Leg Lever (4). Press a 1"Angle Cap (29) |
| |
onto the indicated end of the Weight Tube. |
| |
Note: If you purchased the optional olympic |
| |
expansion kit, attach the olympic sleeve to the |
| |
Weight Tube as shown in the accessory manu- |
| |
al. |
| |
Lubricate an M10 x 72ram Bolt (40). Attach the |
| |
Leg Lever (4) to the Front Leg (8) with the Bolt |
| |
and an M10 Nylon Locknut (19). | 4 | |
| ||
Attach the Spacer (37) to the Leg Lever (4) with |
| |
the M8 x 58mm Bolt (39), two M8 Washers (38), |
| |
and an M8 Nylon Locknut (13). Note: The Spacer |
| |
will fit tightly Inside of the Leg Lever. |
|
6. Press four 1" Square Inner Caps (12)into the indi- | 6 | |
cated ends of the Backrest Tubes (5, 42): Press | ||
| ||
two 1" x 2" Inner Caps (36) into the ends of the |
| |
adjustment tubes. |
| |
With the wide end of the Backrest (6) positioned |
| |
as shown, attach the Backrest Tubes (5, 42) to |
| |
the Backrest with four M6 x 38mm Screws (16) |
| |
and four M6 Washers (25). Note: The Backrest |
| |
Tubes and Backrest must be oriented exactly |
| |
as shown. |
|
12
4216
Tubes
t36 6
7
