7.Lubricate the M10 x t78mm Bolt (17). Attach the Backrest (6) to the Frame (2) with the Bolt, two M10 Washers (24), and an M10 Nylon Locknut (19).
Secure the Backrest (6) to the Frame (2) with the Adjustment Pin (32) through one of the three sets of holes in the adjustment tubes. Secure the Adjustment Pin with the Pin Ctip (14).
Make sure the Adjustment Pin (32) is com- pletely inserted through both holes in the adjustment tubes,
8.With the wide end of the Seat (11) positioned as shown, attach the Seat to the brackets on the Frame (2) with four M6 x 16mm Screws (15).
9.Attach the Curl Pad (27) to the Curl Post (26) with two M6 x 16mm Screws (15).
10.Slide the Curl Post (26) into the Front Leg (8). Align one of the adjustmeht holes ir'nthe Curl Post with the adjustment hole in the Front Leg. Rghten the M10 x 48mm Adjustmer_t Knob (33) into the adjustment hole in the Front Leg. Make sure that you fully tighten the Adjustment Knob.
76
Adjustment
Tubes
8
Wide
End
15
27
lO
8
