Weider 831,150,741 user manual Following Tools not Included are Required for Assembly

Before beginning assembly, carefully read the following information and Instructions:

•Place all parts of the weight bench in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed.

•Read each assembly step before you begin.

•For help identifying the small parts used in assembly, use the PART IDENTIFICATION CHART on the previous page. Note: Some small parts may have been pre-attached for ship- ping purposes. If a part is not in the parts bag, check to see if it has been pre-attached.

•"13ghten all parts as you assemble them, unless instructed to do otherwise.

. Before assembling this weight bench, make sure that you have read and understand the information in the box above.

The weight bench is designed to be used with a mid-width weight set (not Included). To use an Olympic weight set, an optional Olympic expansion kit (model no. 831.150780) is avail- able for purchase. If you have purchased the Olympic expansion kit, use the Olympic Crossbar in place of the standard Crossbar [3] in this step.

Attach the Crossbar (3) to each Upright Base (7) with four M10 x 81 mm Bolts (35), two Support Plates (20), and four M10 Nylon Locknuts (19).

Note the position of the waming decal and make sure that the Upright Bases are oriented exactly as shown.

Slide the Uprights (1) into the Upright Bases (7) and secure them at the desired height with the M10 x 67mm Adjustment Knobs (30).

. Attach the Frame (2) to the Crossbar (3) with two M10 x 81ram Bolts (35) and two M10 Nylon Locknuts (19).

•As you assemble the weight bench, make sure that all parts are oriented as shown in the draw- ings.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE REQUIRED FOR ASSEMBLY:

•Two (2) adjustable wrenches

•One (1) phillips screwdriver .,_

•One (1) rubber mallet

•Lubricant, such as grease or petroleum jelly, and soapy water will also be needed.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches.

1

3O

Waming	1 %
7 Decal
	19
20

2

335

>

6