![](/images/new-backgrounds/1134771/13477113x1.webp)
4.Press a 38mm Square Inner Cap (67) into the square tube on the Butterfly Upright (3).
Slide the Butterfly Upright (3) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base
(2). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.
5.Press a 50mm x 75mm Inner Cap (58) halfway into the top of the Seat Upright (9); it will need to be removed later. Attach the Leg Lever Bumper (77) to the Seat Upright with an M4 x 20mm
Slide the Seat Upright (9) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base
(2).Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.
6.Hold the Seat Frame (8) between the Seat Upright
(9)and the Butterfly Upright (3). Attach the Seat Frame to the Seat Upright with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Do not tighten the Locknuts yet.
Attach the Seat Frame (8) to the Butterfly Upright
(3)with two M10 x 95mm Bolts (92), two M10
Washers (91), and two M10 Nylon Locknuts (87).
Do not tighten the Locknuts yet.
7
4 |
|
|
| 67 |
|
| 3 |
|
|
| 87 |
| 87 |
|
| 2 |
|
|
| 110 |
5 |
|
|
58 |
|
|
77 | 9 |
|
98 |
|
|
14 | 87 | 2 |
|
| |
87 |
|
|
|
| 110 |
6 |
|
|
| 87 |
|
8 |
| 91 |
| 87 | 92 |
|
| |
|
| 91 |
91 |
| 3 |
|
| |
92 | 9 |
|
|
| |
91 |
|
|