STORING THE RESISTANCE SYSTEM
To store the resistance system, first remove the Curl Pad (not shown) and the Leg Lever (not shown) from the resistance system. Secure the Seat Carriage (44) at the position closest to the Leg (5) (see ADJUSTING THE SEAT on page 16). Next, remove the Storage Knob (29) from the Row Plate (28). Lift the Leg toward the Top Frame (37), and tighten the Storage Knob into the side of the Row Plate and into the Rail (4).
To move the resistance system, stand behind the Upright (2) and place the toe of your shoe on the end of the Base Plate (1) and hold the resistance system in the indicated area. Tilt the resistance system back onto the Wheels (65) and roll it to the new location.
WARNING: Make sure that Storage Knob (29) is in place and fully tight- ened each time the resistance system is used.
37 |
Hold in |
this area |
5 |
44 |
2 |
4 |
28 |
65 |
29 |
1 |
17
