Seat Assembly |
|
|
| 33 | |
|
| |
|
| |
|
|
|
33.Locate and open the parts bag labeled “SEAT ASSEMBLY.”
Insert a 1/4” x 2” Carriage Bolt (85) through the cen- ter hole in a Seat Plate (42). Attach the Seat Plate to a Seat (51) with two 1/4” x 3/4” Screws (13).
Insert the 1/4” x 2” Carriage Bolt (85) into the indicat-
ed hole in the Press Seat Frame (52) and secure it with a 1/4” Flat Washer (11) and a 1/4” Nylon Locknut
(16). Secure the other end of the Seat (51) with a 1/4”
x 2” Bolt (86) and a 1/4” Flat Washer (11).
51
85
1142
13
86
52
11
16
34.Press four 3/4” Round Inner Caps (40) into the ends of the Pad Tubes (48) and the indicated tubes on the Leg Lever (49) and the Press Seat Frame (52).
Insert the Pad Tubes (48) into the indicated holes in the Leg Lever (49) and the Press Seat Frame (52). Slide Foam Pads (47) onto the ends of the Pad Tubes.
35.Insert a 1/4” x 2 1/2” Carriage Bolt (12) through the center hole in a Seat Plate (42). Attach the Seat Plate to the Press Backrest (89) with two 1/4” x 3/4” Screws (13).
Insert the 1/4” x 2 1/2” Carriage Bolt (12) with a 1/4” Flat Washer (11) into the indicated hole in the Press Frame Upright (59) and secure it with a 1/4” Nylon Locknut (16).
Secure the other end of the Press Backrest (89) with a 1/4” x 2 1/2” Screw (10) and a 1/4” Flat Washer (11).
34 |
|
|
| 52 | 40 |
| 47 | |
|
| |
|
| 48 |
| 40 |
|
47 |
|
|
| 49 |
|
35 |
|
|
10 |
|
|
|
| 89 |
11 |
|
|
16 | 59 |
|
| 13 | 42 |
11 |
| 12 |
|
|
16
