3.Place two Weight Bumpers (84) over the indicated holes in the Butterfly Base (61). Slide the Weight Guides (58) into the indicated holes.
Attach the Weight Guides (58) to the Butterfly Base
(61)with two 3/8” x 2 1/2” Bolts (6), four 3/8” Flat Washers (17), and two 3/8” Jam Nuts (18).
Slide the eight Weights (8) onto the Weight Guides (58). Make sure the Weights are turned so the pin grooves are on the bottom of the weights.
4.Press a Weight Tube Bumper (76) into the lower end of the Weight Tube (77). Slide the Weight Tube into the center hole in the Weights (8).
Lubricate the holes in the Top Weight (78). Slide the Top Weight onto the Weight Guides (58).
3
58
8
Pin
Grooves
| 84 | |
18 | 18 | |
17 | ||
17 | ||
|
61
17
6
4Lubricate
78
58
77
76 
8
5. Press a 2” Square Inner Cap (38) into the Butterfly | 5 |
|
|
|
|
Top Frame (64). Press two 1” Round Inner Caps (41) |
|
| 38 |
| |
|
|
|
| ||
into the top of the Butterfly Top Frame. |
|
|
|
| |
|
| 2 | 19 | 20 | |
|
|
|
|
| |
Attach the Butterfly Top Frame (64) to the Press Top | 38 | 41 | 64 |
| 19 |
Frame (63) with two 5/16” x 2 3/4” Bolts (20), two |
|
| |||
|
|
| |||
5/16” Flat Washers (19), and two 5/16” Nylon |
|
|
|
| 63 |
|
|
|
|
| |
Locknuts (2). |
|
|
|
|
|
Press a 2” Square Inner Caps (38) into the end of the |
|
| 38 | 2 |
|
|
|
|
| ||
Press Top Frame (63). |
|
|
|
|
|
| 7 |
|
|
|
|
