41.Press a 1 1/2Ó Square Inner Cap (32) into the Leg Lever (29).
Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame
(36)with the Bolt and a 5/16Ó Nylon Locknut
Insert the 5/16Ó x 2Ó Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 5/16Ó Nylon Locknut (3) with a 5/16Ó Flat Washer (8) onto the Eyebolt.
42.Rest the Front Seat Frame (36) on the indicat- ed pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16Ó x 2 3/4Ó Carriage Bolt (14), 3/16Ó Flat Washer (8), and the Seat Knob (40).
SEAT ASSEMBLY
43.Press two 3/4Ó Round Inner Caps (34) into each Pad Tube (28).
Insert a Pad Tube (28) into the Front Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.
Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube.
19
41 |
|
|
|
| 36 |
33 |
| 3 |
|
| |
|
| 29 |
35 |
| 8 |
|
| |
|
| 3 |
| 32 |
|
42 |
|
|
| 42 | 40 |
|
| |
|
| 8 |
14 |
| 36 |
Pin |
|
|
43 |
|
|
|
| 30 |
|
| 34 |
|
| 28 |
29 | 34 |
|
|
| |
30 |
|
|
