Weider manual Part Identification ChartÑModel No. WEBE19300 R0800B

Part Identification ChartÑModel No. WEBE19300 R0800B

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the Part List in the center of this manual. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M8 Nylon	M10 Nylon	M10 Small	M10 Large
Locknut (54)Ñ3	Locknut (11)Ñ38	Washer (6)Ñ14	Washer (58)Ñ6
M8 x 16mm Screw (50)Ñ2		M8 x 70mm Bolt (30)Ñ1
M8 x 25mm Bolt (53)Ñ2		M10 x 45mm Bolt (40)Ñ3
M10 x 20mm Bolt (26)Ñ2		M10 x 65mm Bolt (56)Ñ7
M10 x 25mm Bolt (43)Ñ2		M10 x 75mm Bolt (39)Ñ2
M10 x 30mm Bolt (38)Ñ2		M10 x 80mm Bolt (41)Ñ24
		5