12.Attach the Weight Tube (24) to the Leg Lever
(8) with an M8 x 58mm Bolt (72), two M8 Washers (73), a 13mm x 11.5mm Spacer (53), and an M8 Locknut (67).
Next, press the Leg Lever Bumper (42) onto the Weight Tube (24).
Apply grease to the barrel of an M10 x 54mm Bolt Set (56).
Attach the Leg Lever (8) to the bracket on the Front Leg (2) with the M10 x 54mm Bolt Set
(56). Make sure that the barrel of the Bolt
Set is inserted through both sides of the bracket on the Front Leg.
13.Insert a Long Pad Tube (54) into the indicated hole in the Leg Lever (8).
Slide a Large Foam Pad (25) onto each end of the Long Pad Tube (54). Then, press a Large Pad Cap (46) into each Large Foam Pad.
Repeat this step with the other two Long Pad Tubes (54).
12 |
|
|
|
|
|
|
|
|
|
| Grease | 56 | Bracket |
|
| ||||
|
|
|
|
|
|
| |||
| 67 | 8 |
|
|
| 42 |
| 56 |
|
| 73 |
|
|
| 2 |
| |||
24 | 53 | 73 |
|
| |||||
| 72 |
|
|
| |||||
13 |
|
|
|
|
|
|
|
|
|
46 | 25 |
| 54 |
|
| 54 |
|
| |
|
|
| 8 |
|
| ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| 54 |
| 25 | 46 |
|
|
|
|
|
|
|
| ||
10
