14.Attach the Left Barbell Hook (51) to a Weight Rest (13) as shown with an M10 Silver Washer (70) and an M10 Silver Locknut (34). Do not overtighten the Silver Locknut; the Left Barbell Hook must pivot easily.
Insert the Weight Rest (13) into the Left Upright (6), and tighten an Upright Knob (27) through the Left Upright into one of the adjustment holes in the Weight Rest.
Repeat this step for the other side of the weight bench.
15.Insert a Short Pad Tube (35) into the Left Fly Arm (10). Slide a Small Foam Pad (26) onto the Short Pad Tube.
Repeat this step for the other side of the weight bench.
16.Attach the Curl Pad (20) to the Curl Post (9) with two M6 x 16mm Screws (61).
14 | 51 | 70 34 | |
| |||
|
| 13 | 27 |
|
| 6 |
|
15 |
|
|
|
10 35
26
16 20
9
61
11
