6.Orient the Backrest Support (17) so that the pins are facing downward.
Set the Backrest Support (17) in one of the sets of brackets on the Left and Right Uprights (6, 7).
7.Attach a Fly Arm Bumper (30) to the Left Upright (6) with a Bumper Knob (50).
Attach the other Fly Arm Bumper (30) to the Right Upright (7) in the same way.
8.Identify the Left Fly Arm (10), which has a pivot tube on the indicated side.
Apply grease to an M10 x 130mm Bolt (58).
Attach the Left Fly Arm (10) to the Left Upright
(6) with the M10 x 130mm Bolt (58), an M10 Black Washer (64), and an M10 Black Locknut (66).
Repeat this step for the other side of the weight bench.
6 | 17 | |
Bracket | ||
Pins | ||
7 | ||
| Bracket | |
| 6 | |
7 |
| |
7 |
| |
30 | 6 | |
| 50 | |
| 30 | |
8 |
|
6 |
|
Pivot | 64 66 |
Tube | |
58 | 10 |
| |
Grease |
|
8
