![](/images/new-backgrounds/1302951/30295121x1.webp)
ARM ASSEMBLY
11.Attach the Seat Plate (37) to the Seat Frame (36) using a 1/4” x 2 1/4” Carriage Bolt (38), a 1/4” Flat Washer (78), and a 1/4” Nylon Locknut (2).
12.Attach a Bumper (11) to the Seat Frame (36) using a #10 x 1” Screw (80).
13.Attach the Seat Frame (36) to the Front Upright (42) using two 3/8” x 3 1/4” Bolts (8), a Back Plate (71), and two 3/8” Nylon Locknuts (21).
14.Press a 1 1/2” Square Inner Cap (32) into each end of the Leg Lever (29) and the indi- cated end of the Seat Frame (36).
Lubricate a 5/16” x 2 1/2” Bolt (22). Attach the Leg Lever (29) to the Seat Frame (36) using the Bolt and a 5/16” Nylon Locknut (3). Do not overtighten the Nylon Locknut; the Leg Lever must be able to pivot freely.
11
11 |
|
|
|
|
| 38 |
|
| 36 |
| 37 |
|
|
| |
|
|
| 78 |
|
|
| 2 |
12 |
|
|
|
| 36 |
|
|
|
| 11 | 80 |
|
|
| |
13 |
|
|
|
|
| 42 |
|
8 |
|
|
|
71 |
|
|
|
|
|
| 21 |
|
|
| 36 |
14 |
|
|
|
32 |
|
|
|
|
| 36 |
|
|
|
| 22 |
|
|
| 32 |
3 |
|
| 29 |
|
|
| |
|
|
| 32 |