SEAT ASSEMBLY
35.Attach the Shroud (59) to the brackets on the Top Frame (55) and the Base (4) using four #8 x 1/2” Screws (79).
36.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 18 of this manual.
Before using the training system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and cor- rect the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 21 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See
TROUBLE-SHOOTING AND MAINTENANCE on page 20.
35 | 55 | 79 |
|
| |
| 79 |
|
| 59 |
|
| 79 |
|
|
| 4 |
17
