40.Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
41.Route the VKR Low Cable (72) under the indicated stack of Weights (44).
Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
42.Wrap the VKR Low Cable (72) over a 3 1/2” Pulley
(78).Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates
(63)with a 3/8” x 2” Bolt (100) and a 3/8” Nylon Locknut (87). Make sure that the Cable Trap is turned to hold the Cable in the groove of the Pulley.
43.Wrap the VKR Low Cable (72) under a 3 1/2” Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).
17
40 |
| |
78 |
| |
| 72 | |
93 | 87 | |
| ||
120 |
| |
41 |
| |
44 |
| |
78 | 72 | |
| ||
| 87 | |
93 | 120 | |
| ||
42 |
| |
100 | 63 | |
68 | 87 | |
72 | ||
78 | ||
| ||
43 |
| |
78 |
| |
87 | 72 | |
| ||
2 | 93 |
