7.Press a 50mm x 75mm Inner Cap (46) into the Top Frame (9).

Slide the welded tubes on the Top Frame (9) over the upper ends of the Weight Guides (18, 19).

Attach the Top Frame (9) to the Butterfly Upright

(2)with two M10 x 75mm Bolts (82) and two M10 Nylon Locknuts (101). Do not tighten the

Locknuts yet.

Attach the Top Frame (9) to the Weight Guides (18, 19) with four M10 x 45mm Bolts (51) and four M10 Nylon Locknuts (101). Do not tighten the Locknuts yet.

8.Press a 50mm Thick Square Inner Cap (47) into the Sliding Seat Frame (8). Press a 50mm Square Inner Cap (45) into the indicated end of the Seat Adjustment Frame (4). Press the Metal Plate (44) and the 50mm Angled Outer Cap (43) onto the other end of the Seat Adjustment Frame.

Tighten a “T”-handle (59)into the Sliding Seat Frame (8). Turn the “T”-handle counterclockwise to loosen it. Pull out the handle as far as possible and slide the Seat Adjustment Frame (4) into the Sliding Seat Frame. Release the handle and let it engage one of the adjustment holes in the Seat Adjustment Frame. Then, tighten the handle.

9.Attach the Seat Adjustment Frame (4) to the Leg Press Base (3) with four M10 x 65mm Carriage Bolts (88) and four M10 Nylon Locknuts (101).

Tighten the M10 Nylon Locknuts (101) used in steps 1–3 and 7–9.

7

 

 

 

 

 

9

 

 

101

 

101

 

 

82

 

 

 

51

 

 

 

2

 

46

 

18

 

 

19

 

 

8

47

 

 

 

 

 

 

 

8

 

 

59

 

 

45

 

 

 

 

 

44

43

 

4

 

 

9

 

 

 

 

88

 

 

 

 

88

 

101

 

 

 

 

101

4

 

 

 

101

 

 

3

 

 

 

 

 

101

10

Page 10
Image 10
Weider WESY47330 user manual Tighten the M10 Nylon Locknuts 101 used in steps 1-3