Weider WESY47330 user manual Lubricate the four 56mm Round Bushings 53 with grease

Arm Assembly

10.Attach the Leg Lever Bumper (60) to the Leg Lever Base (5) with an M4 x 25mm Self-tapping Screw (103) and an M4 Washer (104).

Press two 50mm Square Inner Caps (45) and two M10 Round Bushings (79) into the Leg Lever (7).

Lubricate an M10 x 85mm Bolt (96) with grease. Attach the Leg Lever (7) to the Leg Lever Base

(5) with the Bolt and an M10 Nylon Locknut (101).

Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.

11.Press two 50mm Square Inner Caps (45) into the Butterfly Frame (10).

Lubricate an M10 x 225mm Bolt (86) with grease. Attach the Butterfly Frame (10) to the Butterfly Upright (2) with the Bolt, two M10 Washers (99), and an M10 Nylon Locknut (101). Do not over- tighten the Locknut; the Butterfly Frame must be able to pivot easily.

Lubricate the four 56mm Round Bushings (53) with grease.

12.Identify the Left Butterfly Arm (11) by the position of the indicated bracket. Press a 50mm Round Inner Cap (52) and a 25mm Round Inner Cap

(76)into the Butterfly Arm.

Attach the Left Butterfly Arm (11) to the Butterfly Frame (10) with an M10 x 82mm Carriage Bolt

(93)and an M10 Nylon Locknut (101). Do not overtighten the Locknut; the Butterfly Arm must be able to pivot easily.

Repeat this step with the Right Butterfly Arm (12).

10
		101
Lubricate		45
96	60	79
		7
5
	104	103
		45
11
2
		Lubricate
45		86
		99
		53
99		10
101
53		53
		Lubricate
12
		93
10	101	11
	Bracket
12
		76
		52

11