![](/images/new-backgrounds/1255010/25501033x1.webp)
34.Route the Butterfly Cable (67) through the Butterfly Upright (2) and over a 100mm Pulley
(38).Attach the Pulley and a Long Cable Trap
(68)to the Butterfly Upright with an M10 x 50mm Bolt (81) and an M10 Nylon Locknut (101). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley.
35.Attach the end of the Butterfly Cable (67) to the
36.Identify the Lower Short Stack Cable (64). Attach the Cable to the Base (1) with an M8 x 67mm Shoulder Bolt (90), two M8 Washers (100), and an M8 Nylon Locknut (87).
37.Wrap the Lower Short Stack Cable (64) over a 100mm Pulley (38). Attach the Pulley to the Double
38.Note: The following steps are shown from the back of the weight system.
Wrap the Lower Short Stack Cable (64) under a 100mm Pulley (38). Attach the Pulley and a Long Cable Trap (68) to the Base (1) with an M10 x 45mm Bolt (51). Make sure the Cable Trap is oriented to hold the Cable in the groove of the Pulley.
34 |
|
|
|
|
| 38 | 81 |
|
|
| 68 |
|
|
|
| 101 | 67 | 2 |
|
35 | 67 |
|
|
|
|
|
|
| |
| 40 |
|
| 67 |
|
|
|
| |
| 100 |
|
|
|
| 87 |
|
| 87 |
36 |
| 87 |
| |
|
|
| 100 |
|
|
|
| 64 |
|
|
| 1 | 100 | 90 |
|
|
| ||
37 |
|
|
|
|
| 42 |
|
| |
| 51 |
| 101 |
|
|
|
|
| |
| 38 | 64 |
| |
38 |
|
|
|
|
|
|
| 38 |
|
|
|
| 1 | 64 |
|
|
| 51 | |
|
|
| 68 |
|
17