Weider WESY47330 Adjusting the Seat, Converting the Butterfly Arms, Attaching the Curl PAD

ADJUSTING THE SEAT

To adjust the height of the Seat (30), loosen the “T”-handle (59) and pull it out as far as it will go. Move the Seat to the desired height and reengage the “T”-handle into the Seat Post (27). Fully tighten the “T”-handle.

CONVERTING THE BUTTERFLY ARMS

To use the Butterfly Arms (11, 12) as fly arms, insert the Butterfly Pins (78) into the inner holes in the Butterfly Frame (10) (see inset drawing A).

To use the Butterfly Arms (11, 12) as press arms, insert the Butterfly Pins (78) into the outer holes in the Butterfly Frame (10) and the tabs on the Butterfly Arms (see inset drawing B).

Make sure that the Butterfly Pins (78) are fully inserted into the same holes on both sides of the Butterfly Frame (10) before performing any exer- cises.

ATTACHING THE CURL PAD

To use the Curl Pad (29), first engage the leg lever lock (see USING THE LEG LEVER LOCK on the pre- vious page.) Slide the Curl Post (not shown) onto the Leg Lever (7). Tighten the Curl Post “T”-handle (94) into the Curl Post and the Leg Lever.

			30
		59
			27
			78
			10
			78
A	78		11
		11	12
B
	78	11
			29
			94
			7
27