
SEAT ASSEMBLY
40.Locate and open the parts bag labeled “SEAT ASSEMBLY.”
Insert a 1/4” x 2 1/2” Carriage Bolt (92) through the center hole in a Seat Plate (37). Attach the Seat Plate to the Rear Backrest (85) with two 1/4” x 3/4” Screws (18).
Insert the 1/4” x 2 1/2” Carriage Bolt (92) through the indicated hole in the Leg Press Upright (56). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Flat Washer (10) onto the Carriage Bolt. Attach the top of the Rear Backrest (85) to the Leg Press Upright with a 1/4” x 2 1/2” Screw (43) and a 1/4” Flat Washer (10).
41.Attach one end of a Seat (13) to the Rear Seat Frame (100) with two 1/4” x 3/4” Screws (18). Attach the other end of the Seat to the Rear Seat Frame with a 1/4” Flat Washer (10) and a 1/4” x 2 1/2” Screw (43).
42.Attach the Assist Seat (104) and the Angle Bracket (110) to the Assist Arm (105) with four 1/4” Flat Washers (10) and four 1/4” x
2 1/2” Screws (43).
40 |
|
| 85 |
56 |
|
37 | 92 |
18 |
|
43 |
|
10 |
|
2 |
|
41 | 13 |
| |
| 100 |
18 | |
| 18 |
| 10 |
| 43 |
42 |
|
104 |
|
110 |
|
105 |
|
| 10 |
10 |
|
43 |
|
19