Weider WESY86301 user manual Cable Trap is turned to hold the Cable in place

29.Find the Press Cable (88)—this is the longest Cable. Attach the end of the Press Cable (88) to the Large “U” Bracket (84) with a 1/4” Nylon Locknut (44) and a 1/4” Washer (37). Do not completely tighten the Nylon

Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing.

30.Wrap the Press Cable (88) around a 3 1/2” Pulley (82). Attach the Pulley and a Cable Trap (80) to the indicated bracket on the Press Base (13) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42). Be sure that the

Cable Trap is turned to hold the Cable in place.

CABLE ASSEMBLY

31.Wrap the Press Cable (88) around a 3 1/2” Pulley (82). Attach the Pulley and a Cable Trap (80) to the other bracket on the Press Base (13) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42). Be sure that the Cable

Trap is turned to hold the Cable in place.

14

29
		44
		37	84
	44
	37	88
88	84
30
		88
		80	42
		82
	50	13
31
		88
		80
			42
		82
	50	13