5.Insert two Weight Guides (23) into one of the brackets on the Weight Base (14). Attach the lower ends of the Weight Guides with a 5/16” x 6” Bolt (67), two 1/2” x 3/4” Spacers (69), and a 5/16” Nylon Locknut (40). Do not over- tighten the Nylon Locknut.
Attach the other Weight Guides (23) in the same manner.
6.Slide a Weight Bumper (27) onto each of the Weight Guides (23).
Slide eight Weights (90) onto each set of Weight Guides (23). Be sure that the pin grooves are on the indicated side of each stack of Weights.
FRAME ASSEMBLY
7.Press a Weight Tube Bumper (26) into each Weight Tube (25).
Insert a Weight Tube (25) into each stack of Weights (90). Be sure that the pins on the
Weight Tubes are in the pin grooves in the upper Weights.
7
5 |
|
|
|
|
| 23 |
|
23 |
|
|
|
40 |
|
|
|
14 | 69 |
| 67 |
6 |
|
|
|
|
|
| 90 |
|
|
| Pin |
|
|
| Grooves |
90 |
|
|
|
Pin |
|
| 27 |
Grooves |
|
|
|
27 |
|
|
|
|
| 23 | 23 |
|
|
| |
7 |
|
|
|
|
| 25 |
|
|
| 26 |
|
90 |
|
| 90 |
|
|
|
