FRAME ASSEMBLY
2.Slide the Ab Upright (1) onto the indicated 5/16” x 2 1/2” Carriage Bolts (49) in the Weight Base (14). Hand tighten two 5/16” Nylon Locknuts (40) onto the Carriage Bolts.
Do not tighten the Nylon Locknuts yet.
Slide the Leg Press Upright (4) onto the indi- cated 5/16” x 2 1/2” Carriage Bolts (49) in the Weight Base (14). Hand tighten two 5/16” Nylon Locknuts (40) onto the Carriage Bolts.
Do not tighten the Nylon Locknuts yet.
3.Press a 2” Square Inner Cap (56) into each end of the Top Frame (2). Press a 2” Square Inner Cap (56) into each side of the Butterfly Frame (3). Press two 1” Round Inner Caps
(70)into the top of the Butterfly Frame.
Attach the Butterfly Frame (3) to the Top Frame (2) with a 5/16” x 3” Bolt (92). Be sure that the Bolt is on the side shown.
Finish attaching the Butterfly Frame (3) to the Top Frame (2) with a 5/16” Nylon Jam Nut (91), a 5/16” x 2 3/4” Bolt (55), a 5/16” Washer (20), and a 5/16” Nylon Locknut (40).
4.Slide the Front Seat Frame (8) onto the indi- cated 5/16” x 2 1/2” Carriage Bolts (49) in the Press Base (13). Hand tighten two 5/16” Nylon Locknuts (40) onto the Carriage Bolts.
Attach the other end of the Front Seat Frame
(8)to the Leg Press Upright (4) with two 5/16” x 2 3/4” Bolts (55), two 5/16” Washers (20), and two 5/16” Nylon Locknuts (40).
Press a 2” Square Inner Cap (56) into the Front Seat Frame (8).
6
2 |
|
|
|
4 |
|
|
|
1 |
|
|
|
40 |
| 40 |
|
|
|
| |
14 |
| 13 |
|
|
|
| |
49 | 49 |
|
|
3 |
|
|
|
|
| 56 |
|
91 |
|
|
|
40 |
|
|
|
20 | 92 | 70 | 56 |
2 |
|
|
|
55 |
|
| 3 |
56 | 56 |
|
|
|
|
| |
4 |
|
|
|
40 |
|
|
|
55 |
|
|
|
20 | 8 |
|
|
|
|
| |
4 |
| 56 | |
13 |
| 40 |
|
|
|
| |
49 |
|
|
|
