Weider WESY96400 user manual Cable Assembly

CABLE ASSEMBLY

18. Wrap the High Cable (58) around a “V”-Pulley	18
(50). Attach the “V”-Pulley and a Long Cable				86
					31
Trap (31) to the indicated bracket on the Front			58
Upright (42) with a 3/8” x 2 1/2” Bolt (86) and
a 3/8” Nylon Locknut (21). Be sure that the					50
Long Cable Trap is positioned to hold the
Cable in place.
					Bracket
					42
			21
19. Route the High Cable (58) around the “V”-	19
Pulley (50) on the Left Arm (47). Be sure that					31
				86
the Cable is in the groove of the Pulley
			50
and that the Long Cable Trap (31) is posi-
tioned to hold the Cable in place. Tighten
the 3/8” x 2 1/2” Bolt (86) and the 3/8” Nylon
Locknut (not shown).
			58
				47
20. Route the High Cable (58) around the “V”-	20
Pulley (50) on the Right Arm (48). Be sure				86	50
			31
that the Cable is in the groove of the “V”-
Pulley and that the Long Cable Trap (31) is
turned to hold the Cable in place. Tighten
the 3/8” x 2 1/2” Bolt (86) and the 3/8” Nylon
Locknut (not shown).
			58		48
21. Attach the Pulley Bracket (20) to the Top	21
Frame (55) with the 5/16” x 5” Bolt (68) and a			68
5/16” Nylon Locknut (3). Do not overtighten
the Nylon Locknut; the Pulley Bracket
must be able to move freely.
See the inset drawing. Route the High Cable		55		66
(58) around the 3 1/2” Pulley (15) attached to	20
the Pulley Bracket (20). Tighten the 3/8” x 2”				12
					15
Bolt (12) and a 3/8” Nylon Locknut (not			3
shown). Be sure that the Cable is in the
				58
groove of the Pulley and that the Cable
Trap (66) is turned to hold the Cable in
place.

12